As you know,one striking feature of winter is low temperature. In some dry areas, electrostatic is significant.Therefore, when using the UV printer in winter, it is particularly important to maintain the machine, otherwise it is easy to cause printing ink dusty, hardware wear, print head blockage and so on.
Na čo by sme si teda mali dať pozor pri používaní UV tlačiarne v zime? Dovoľte mi hovoriť s vami.
1. Adjust the temperature and humidity of the working environment
Vyžaduje sa, aby teplota pracovného prostredia väčšiny UV tlačiarní bola regulovaná na 20-28 stupňov a vlhkosť sa udržiavala na 40 percent - 60 percent. S výnimkou špeciálnych prispôsobených strojov musíte pracovať podľa poskytnutých pokynov. V prípade akýchkoľvek otázok by ste sa mali včas poradiť s technikmi príslušných výrobcov. Teplomer a vlhkomer je možné umiestniť do pracovného prostredia a zaznamenávať ich každý deň. V severnej oblasti je zvyčajne zabezpečené vnútorné vykurovanie alebo klimatizácia, čím sa prostredie stáva suchším. Môže sa použiť rozprašovacia voda alebo zvlhčovač, aby sa udržala vlhkosť a zabránilo sa prachu a elektrostatickej elektrine.
Fortune UV printer has its own ink cartridge heating system and temperature control induction adjustment. It can observe the temperature of the working state of the machine at any time without relying on the thermometer at any time.
2. Udržiavajte stroj včas podľa postupu v príručke
The dry and cold weather in winter will increase the friction of the ink car on the guide rail, which will weaken the lubrication effect of the lubricating oil. Therefore, check the guide rail in time and add lubricating oil; In winter, the temperature is dry and static electricity is easy to occur, so the power supply of UV machine shall be properly grounded and three-phase power plug shall be used.
Fortune UV printer equipped with THK silent linear guide rail, it can realize high-precision linear decoding and reduce the friction of the carriage.
3. Výber UV atramentu
The temperature is low in winter, which has the greatest impact on ink. The lower the temperature, the greater the viscosity of the ink. If possible, try to choose the ink suitable for winter use, and keep the temperature of the working environment at 15-30 degree .
Here to remind users that when choosing ink, we must choose the original ink of the manufacturer. The original ink quality is more guaranteed, the tacit understanding with the printer is high, and the printing effect is better, which is not easy to damage the printhead.
4.Dbajte na skladovanie médií
Properly store the printed paper consumables in winter. In areas with large temperature difference, the materials are easily affected by moisture and deformation, so the picture will not be easy to dry during printing, which will affect the printing effect and customer satisfaction.
Therefore, it is necessary to preserve the printing media under relatively stable environmental conditions, reasonably transport and store materials, and avoid material damage caused by manual handling or extrusion. Unused materials shall be properly placed in time to ensure normal use before the next printing.
Fortune UV printer, equipped with linear motor and metal grating, not only has fast printing speed, but also has high quality, which greatly improves work efficiency and creates more production value.
Vyššie uvedené sú opatrenia na údržbu UV tlačiarne počas štyroch zimných mesiacov. Dúfam, že vám môžem pomôcť. Ako náš každodenný partner musí byť UV tlačiareň dobre udržiavaná. Ak máte ďalšie otázky, zanechajte nám správu v spodnej časti článku a my zabezpečíme odborných technikov, ktorí vám na ne odpovedia.
